HOME  »  Bed Knobs and a Broomstick »  Viewing Stained Nose     [Image 14 of 27]  :: Jump To  
  First slide Previous slide      Show/Hide EXIF Info Index Page Start/Stop the slide show      Next slide Last slide Help
Comment: Balse is not known for its beautiful grain, but this still stained up nicely.
MMT and Stuffer * The motor mount tube. Note the phenolic liner to the left (rocket forward) and the Kaplow Clips and gussets to the right. * 2339 x 774 * (497KB)

Tail Cone Assembly * The tail cone is made of posterboard. After inserting some stiffening rings, I coated it with thin CyA for strength and stiffness. (The cone is about 30 cm long.) * 853 x 2444 * (478KB)

Aft Cone Assembly * Assembly detail of the aft cone (the broom). Note the blind nut threads for the Kaplow Clips, the launch lug and launch rod hole (dowel is through the lug and hole, into the cone, for alignment), and the cardboard stiffener inside the cone. * 1980 x 1813 * (695KB)

Nose Aft * Aft end of the nose cone assembly. * 1920 x 2560 * (960KB)

Unstained Nose * Nose cone (the bed knob), ready for staining. Thanks to my friend Dan Schkolnik for turning it! * 805 x 1806 * (512KB)
Next slide
 
Stained Nose.jpg - 746 x 2281 - (545KB)
Download file (545KB)
4/29/10 10:18 PM
Nose and Tail * The bed knob and the broom: stained nose cone and painted cone tail. * 2298 x 1000 * (593KB)

Kinked Tube View 1 * While painting, the rocket fell over and the tube kinked. Well, broke, really. Yes, I was able to repair it: just sectioned and spliced. * 2554 x 1224 * (534KB)

Kink Close Up * Close up view of the body tube kink * 1641 x 1304 * (439KB)

In the Cradle * Bed Knobs and a Broomstick, in the cradle. * 2825 x 942 * (1.22MB)

On the Pad, Maiden Launch * Bed Knobs and a Broomstick, ready for maiden launch. * 2000 x 3008 * (964KB)
Album last updated on 5/6/10 10:53 PM
Powered by Jalbum 8.8 and BluPlusPlus skin
Copyright © 2010 Alan M. Marcum, all rights reserved.